TORO-sol C31

TORO-sol C33 mould protector (wax)TORO-sol C33 forms a complete wax-like protective film over the surface of moulds and dies. Prevents surface contamination on start-up from dissolved deposits between inserts, ejector pins, etc..

TORO-sol R 21 silicone free release agentTORO-sol R21 is a highly effective non-silicone based release agent that is suitable for use in all thermoplastic and thermoset processing (including PC). TORO-sol R21 is suitable to polymers with a processing temperature of up to 400°C.

mould cleaning spray / mould cleansing foamTORO-clean MFTORO-clean MF is a highly active cleansing foam, capable of dissolving contaminants by itself.The foam consistency guarantees an especially long application time of the active agents. Applicable for cold and warm moulds.

 Cleaning for cylinders, screws and hot-runners TORO-clean   TORO-clean ASA / TORO-clean ASA-M (Injection molding, extrusion) The cylinder cleaning granulate material TORO-clean ASA has the highest cleaning performance and is suited for all commerically available thermoplastic materials up to 310°C.The cylinder cleaning granulate material TORO-clean ASA - M is the economical base material von TORO-clean ASA with good cleaning performance and is suited for all commerically available thermoplastic materials up to 340°C. TORO-clean ASA / TORO-clean ASA-M is odorless and can also be used for transparent plastics.  TORO-clean ASA bzw. TORO-clean ASA-M can be used to clean shut-off nozzles as well as hot runner systems. TORO-clean ASA is the economical alternative to ASAclean* U or GLOBAL or Klüber/Lusin* G320 or OH 311. (*registered trademarks Asahi Chemical bzw. Klüber)

 Cleaning for cylinders, screws and hot-runners TORO-clean  TORO-clean HTG-X (Injection molding, extrusion)In order to optimize the cleaning action TORO-clean is enhanced with 30% glas fibre as well as heat-stabilized.TORO-clean HTG-X is therefore an extra strong version for all commerically available thermoplastic materials up to 400°C. TORO-clean HTG-X can be used to clean shut-off nozzles as well as hot runner systems.

 Cleaning for cylinders, screws and hot-runners TORO-clean   TORO-clean ASA / TORO-clean ASA-M (Injection molding, extrusion) The cylinder cleaning granulate material TORO-clean ASA has the highest cleaning performance and is suited for all commerically available thermoplastic materials up to 310°C.The cylinder cleaning granulate material TORO-clean ASA - M is the economical base material von TORO-clean ASA with good cleaning performance and is suited for all commerically available thermoplastic materials up to 340°C. TORO-clean ASA / TORO-clean ASA-M is odorless and can also be used for transparent plastics.  TORO-clean ASA bzw. TORO-clean ASA-M can be used to clean shut-off nozzles as well as hot runner systems. TORO-clean ASA is the economical alternative to ASAclean* U or GLOBAL or Klüber/Lusin* G320 or OH 311. (*registered trademarks Asahi Chemical bzw. Klüber)

 Cleaning for cylinders, screws and hot-runners TORO-clean  TORO-clean HT-G (Injection molding, extrusion)The cylinder cleaning granulate material TORO-clean HT-G of high technical quality is the economical  universal type for all commerically available thermoplastic materials up to 400°C. The cylinder cleaning granulate material TORO-clean HT-G is the proven TORO-clean HT with the material changed to granular material instead of a powder.   TORO-clean HT-G can be used to clean shut-off nozzles as well as hot runner systems.