TORO-sol C33

mould cleaning spray / mould cleansing foamTORO-clean MFTORO-clean MF is a highly active cleansing foam, capable of dissolving contaminants by itself.The foam consistency guarantees an especially long application time of the active agents. Applicable for cold and warm moulds.

TORO-sol C 31 mould protector (oil)TORO-sol C31 provides a highly effective protection against rust and corrosion.TORO-sol C31 displaces water, dissolves existing rust and has excellent lubrication properties.

TORO-sol R 21 silicone free release agentTORO-sol R21 is a highly effective non-silicone based release agent that is suitable for use in all thermoplastic and thermoset processing (including PC). TORO-sol R21 is suitable to polymers with a processing temperature of up to 400°C.

 Cleaning for cylinders, screws and hot-runners TORO-clean   TORO-clean ASA / TORO-clean ASA-M (Injection molding, extrusion) The cylinder cleaning granulate material TORO-clean ASA has the highest cleaning performance and is suited for all commerically available thermoplastic materials up to 310°C.The cylinder cleaning granulate material TORO-clean ASA - M is the economical base material von TORO-clean ASA with good cleaning performance and is suited for all commerically available thermoplastic materials up to 340°C. TORO-clean ASA / TORO-clean ASA-M is odorless and can also be used for transparent plastics.  TORO-clean ASA bzw. TORO-clean ASA-M can be used to clean shut-off nozzles as well as hot runner systems. TORO-clean ASA is the economical alternative to ASAclean* U or GLOBAL or Klüber/Lusin* G320 or OH 311. (*registered trademarks Asahi Chemical bzw. Klüber)

 Cleaning for cylinders, screws and hot-runners TORO-clean  TORO-clean HTG-X (Injection molding, extrusion)In order to optimize the cleaning action TORO-clean is enhanced with 30% glas fibre as well as heat-stabilized.TORO-clean HTG-X is therefore an extra strong version for all commerically available thermoplastic materials up to 400°C. TORO-clean HTG-X can be used to clean shut-off nozzles as well as hot runner systems.

 Cleaning for cylinders, screws and hot-runners TORO-clean   TORO-clean ASA / TORO-clean ASA-M (Injection molding, extrusion) The cylinder cleaning granulate material TORO-clean ASA has the highest cleaning performance and is suited for all commerically available thermoplastic materials up to 310°C.The cylinder cleaning granulate material TORO-clean ASA - M is the economical base material von TORO-clean ASA with good cleaning performance and is suited for all commerically available thermoplastic materials up to 340°C. TORO-clean ASA / TORO-clean ASA-M is odorless and can also be used for transparent plastics.  TORO-clean ASA bzw. TORO-clean ASA-M can be used to clean shut-off nozzles as well as hot runner systems. TORO-clean ASA is the economical alternative to ASAclean* U or GLOBAL or Klüber/Lusin* G320 or OH 311. (*registered trademarks Asahi Chemical bzw. Klüber)

 Cleaning for cylinders, screws and hot-runners TORO-clean  TORO-clean HT-G (Injection molding, extrusion)The cylinder cleaning granulate material TORO-clean HT-G of high technical quality is the economical  universal type for all commerically available thermoplastic materials up to 400°C. The cylinder cleaning granulate material TORO-clean HT-G is the proven TORO-clean HT with the material changed to granular material instead of a powder.   TORO-clean HT-G can be used to clean shut-off nozzles as well as hot runner systems.